Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Glendale?
New garage door installation in Glendale typically costs between $700 and $2,200 for the door and hardware, plus $250 to $550 if you’re adding a new opener. Most single-car replacements land near the lower end ($700-$1,200), while double doors in a custom wood-look or insulated steel finish usually fall in the $1,400-$2,200 range. If your current door is failing, the first step is knowing whether repair or replacement makes more sense; a free estimate settles that before you spend a dollar.
We’re Suncrest Garage Door Repair, and garage doors are the only thing we do. That single focus shapes our pricing: no markup to cover a general handyman’s other trades, no brand lock-in that pushes you toward one manufacturer. We install and service the door you have, or help you pick one that actually fits your home and budget through our Garage Door Installation services.
Garage Door Installation Cost Breakdown (2026)
Here’s what Glendale homeowners actually pay across the pieces of a typical install. Use this table to line up your expectations before you call, and treat every range as a starting point we can narrow down once we see your opening, your old door, and your wiring.
| Line Item | Typical Glendale Range |
|---|---|
| New door installation (single, standard steel) | $700 – $1,400 |
| New door installation (double, insulated or wood-look) | $1,400 – $2,200 |
| Opener installation (chain or belt drive) | $250 – $550 |
| Panel replacement (if only one section is damaged) | $250 – $500 |
| Spring repair or replacement | $180 – $340 |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| General garage door repair (blended) | $150 – $600 |
What pushes you toward the top of a range? A larger opening, a heavier door material, or a smart opener with built-in Wi-Fi and battery backup (LiftMaster and Chamberlain models tend to sit on the higher side of the opener line item). What keeps you lower? Simple single doors, standard steel panels, and reusing a solid existing opener. The steadiest way to know which end you’re on is a free inspection, and we’ll quote it in writing before any work begins.
One note that matters here: if your door’s springs or cables are the failing part, we often recommend repairing rather than replacing the whole door. Repair first, replace only when it makes sense. A door with sound panels doesn’t need to be thrown out because one spring let go.
What Affects Garage Door Installation Pricing in Glendale
- Door size and material. Single-car steel is the budget-friendly baseline; double doors, carriage-house styles, and insulated wood-look panels climb from there. Glendale homes run the full range, from 1950s ranch houses to newer builds near the foothills, so opening sizes vary a lot more than a flat-rate price sheet would suggest.
- Opener type and smart features. A basic chain-drive opener keeps the cost down. Belt-drive and Wi-Fi-enabled openers, which we regularly install for LiftMaster and Chamberlain systems, sit higher. If you’re upgrading an older Craftsman or Raynor unit, we’ll tell you plainly whether a new opener makes sense or whether a repair is the better money.
- Existing structure and tracks. A warped track, a sagging header, or a worn torsion bar all add labor. In older Glendale homes we sometimes find tracks that were mounted decades ago and have shifted, which means realigning before the new door can run true.
- Springs and cables at install time. A full install comes with new springs and cables, but if only part of the system is being swapped, those line items appear separately ($180-$340 for springs, $130-$250 for cables). These are high-tension components, and we handle them with a trained technician and the right tools, never a homeowner rig.
- Climate and the Glendale foothills. The dry, hot summers through Glendale and the Verdugo hills take a toll on wood doors, and the occasional Santa Ana wind gusts can stress a poorly balanced door. We size springs and recommend finishes with that climate in mind, so the door holds up through years of dry heat rather than failing a few summers in.
- Permits. Most straight like-for-like replacement doesn’t trigger a permit, but structural changes or a larger opening can require one through the City of Glendale. We’ll flag that up front so it’s not a surprise on the invoice.
How to Save on Garage Door Installation
Nobody wants to overpay for a door that outlives the mortgage. A few practical moves keep the number down without cutting corners:
- Know whether you need the whole door. If only one panel is dented, panel replacement runs $250-$500 versus a full install. Same with springs and cables: those repairs ($180-$340 and $130-$250) can keep a good door running for years.
- Reuse a healthy opener. Your existing Genie or LiftMaster might still have plenty of life. If it’s not the problem, we won’t replace it. Your opener is a daily driver, and we treat it that way, checking it before recommending a new one.
- Standard sizes and finishes cost less. A stock steel door in a common size installs faster and cheaper than a custom order.
- Bundle door and opener in one visit. One call covers the door, the opener, and the installation, which means no double labor charges.
- Get a free written estimate first. Estimates are free, and we’ll show you where the money is going before you commit. Call (855) 473-2620 to set one up.
For the full picture of how a new install works end to end, from product selection through final calibration, see our Garage Door Installation in Glendale page. When the job’s done, you’re back to the home routine without a second thought.
FAQs – Garage Door Installation Cost
How much does a new garage door cost in Glendale?
New garage door installation in Glendale runs $700 to $2,200 for the door and hardware, with most homes falling in the $700-$1,400 range for single doors and $1,400-$2,200 for double or insulated doors. Add $250-$550 if you’re installing a new opener. Call (855) 473-2620 for an exact quote, and estimates are free.
Is it cheaper to repair or replace my garage door?
Repair is usually cheaper when the door’s panels and structure are still sound. A spring fix ($180-$340) or cable repair ($130-$250) costs far less than a full install, and a dented panel can be swapped for $250-$500 instead of replacing the whole door. Replacement wins when the door is worn across multiple panels or the frame is failing. We’ll tell you honestly which side you’re on; call (855) 473-2620.
How much does garage door installation cost with a new opener?
Budget $950 to $2,750 for a new door plus opener together. That combines the door and hardware ($700-$2,200) with opener installation ($250-$550). Smart openers from LiftMaster and Chamberlain land on the higher end; basic chain-drive units stay lower. Call (855) 473-2620 for a free estimate.
Does garage door installation require a permit in Glendale?
Most like-for-like replacements in Glendale don’t require a permit, but structural changes, a larger opening, or modifications to the framing can through the City of Glendale. We’ll check your specific situation and tell you before work starts. Call (855) 473-2620 and we’ll walk you through it; estimates are free.
How long does installation take, and can you come soon?
A standard single-door install takes a few hours; double doors or a door-plus-opener job runs longer. We do free estimates promptly and schedule installation around you. The fastest way to lock in a date is to call (855) 473-2620 for your free estimate.
Pricing reflects the Glendale market as of 2026. Suncrest Garage Door Repair offers free estimates – call (855) 473-2620.
What Our Customers Say
"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Dale Thompson"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Carlos Ramirez"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Justin Lin